短寿命開始剤を用いるメタクリル酸メチルの連続バルク重合

  • 渕上 吉男
    (株) クラレ中条工場アクリル技術室 (株) クラレ倉敷工場
  • 井波 利明
    (株) クラレ中条工場アクリル技術室 (株) クラレ中条工場

書誌事項

タイトル別名
  • Continuous Bulk Polymerization of Methyl Methacrylate using Very Short-Life Initiator.
  • タン ジュミョウ カイシザイ オ モチイル メタクリルサン メチル ノ レンゾ

この論文をさがす

抄録

A simple and unique process for the continuous bulk polymerization of methyl methacrylate (MMA) by CSTR reactor was developed as a result of an investigation using a very short-life radical initiator. Advantages of the new process are as follows : (1) MMA conversion decreases with a rise in the reaction temperature. As a result, uncontrollable acceleration of the rate of reaction is avoided and MMA conversion is self-controlled and kept constant. (2) Initiator concentration in the reaction mixture is negligibly small compared with that of the feed stream (about 1/ 1000). This makes it possible for MMA conversion to be held constant during temporary shut-down of the continuous operation. As a result, not only material loss and energy loss but also troublesome operation for shut-down is avoided. (3) The half-life period of the initiator becomes shorter than the time for complete mixing, and consequently MMA conversion is changed by impeller speed. This leads to decrease in utilization efficiency of the initiator and compensates for acceleration of the rate of reaction by the gel-effect. As a result, MMA conversion can be controlled accurately by addition of AIBN solution using an automatic flow-rator.

収録刊行物

被引用文献 (1)*注記

もっと見る

参考文献 (7)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ