書誌事項
- タイトル別名
-
- Mechanical Properties of Ni-Fe-Al Ternary Alloys and their Matrix Composites.
- Ni Fe Al3 ゲンソ ゴウキン ノ キカイテキ トクセイ ト フクゴウ
この論文をさがす
抄録
NiAl binary and Ni-Fe-Al ternary alloys, with the composition of 40.50at%Al and x ;[Fe]/( [Nil+Fe])=0-0.20, were fabricated by the reactive hot-press sintering. The addition of Fe to NiAl resulted in the decrease of fracture toughness in the case of 50at%AI, however, toughness of 40 and 45at%Al alloys increased to about 30% of the value of NiAl.<BR>NiAl and Ni-Fe-45at%Al matrix composites were fabricated successfully. When the proportionality limit of matrices were <500MPa, it increased by the addition of A12O3 short fibers. In the Ni-Fe-45at%Al matrix composites reinforced by β-SiC whisker, the proportionality limit markedly increased with the addition of under 5vol%. The Al2O3 short fiber and the β-SiC whisker reinforced Ni-Fe-45at%Al matrix composites had higher strength at room temperature than the NiAl matrix ones.
収録刊行物
-
- 粉体および粉末冶金
-
粉体および粉末冶金 42 (11), 1258-1263, 1995
一般社団法人 粉体粉末冶金協会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001206308945536
-
- NII論文ID
- 10001750186
-
- NII書誌ID
- AN00222724
-
- ISSN
- 18809014
- 05328799
-
- NDL書誌ID
- 3642096
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可