放電焼結法により作製したRuAl金属間化合物バルク体の機械的特性 [in Japanese] Mechanical Properties of Ruthenium Aluminide Prepared by Plasma Activated Sintering Process [in Japanese]
Access this Article
Search this Article
RuAl is one of the potentially useful intermetallics with a high melting temperature(2333K) as a structural material. Ru<SUB>100-x</SUB>Alx(x=45, 47.5, 50, 52.5, 55at%) powders were prepared by mechanical alloying (MA). The MA powders were subsequently consolidated by Plasma Activated Sintering process(PAS) at 1673-1773K for 10 minutes under 50MPa pressure. Each compact had sub-micron structure, which were consist of Ru and RuAl for 45, 47.5 and 50 at%Al compacts, RuAl and RuAl2 for 52.5 and 55 at%Al compacts. Compressive tests were carried out for Ru-Al compacts at room temperature. Some of them below 50 at%Al exhibited compressive yield stress of 2.0-2.8 GPa and compressive yield strain of more than 25%.
- J. Jpn. Soc. Powder Powder Metallurgy
J. Jpn. Soc. Powder Powder Metallurgy 43(9), 1141-1146, 1996-09-15
Japan Society of Powder and Powder Metallurgy