焼結体の音速測定による気孔率分布および弾性的・機械的特性評価

  • 廣瀬 徳豊
    東京都城東地域中小企業振興センター
  • 浅見 淳一
    東京都城南地域中小企業振興センター
  • 棚木 敏幸
    東京都城東地域中小企業振興センター
  • 湯浅 真
    東京理科大学理工学部 東京理科大学界面科学研究所
  • 関根 功
    東京理科大学理工学部 東京理科大学界面科学研究所

書誌事項

タイトル別名
  • Evaluation of porosity distribution, elastic and mechanical property of sintered compacts by measurements of sound velocities.
  • ショウケツタイ ノ オンソク ソクテイ ニ ヨル キコウリツ ブンプ オヨビ

この論文をさがす

抄録

In this study, the effects of porosity on sound properties, elastic moduli (Young's modulus, shear modulus and Poisson's ratio) and tensile strength of sintered compacts were investigated. The sound velocities were obtained by an acoustic pulse method.<BR>At the same porosity, the elastic moduli increased with increasing of sintering temperature. In the case that the longitudinal wave velocity and sintering temperature were known, the porosity of measurement area (partial porosity) was able to calculated.<BR>In addition, the prediction of fractured position with an acoustic microscope and the calculation of partial porosity of fractured position from measurement of the longitudinal wave velocity were carried out, we obtained the relationships between elastic moduli, tensile strength and porosity of fractured position. From the results, since the partial porosity of fractured position were larger than the average porosity, the elastic moduli and the tensile strength against average porosity were underestimated in comparison with that against partial porosity of fractured position.

収録刊行物

被引用文献 (1)*注記

もっと見る

参考文献 (10)*注記

もっと見る

詳細情報

問題の指摘

ページトップへ