金属層挿入酸化物被覆ステンレス鋼の腐食挙動

書誌事項

タイトル別名
  • Corrosion Behaviour of Oxide Film Coatings with Intermediate Metal Layers on Stainless Steel.
  • キンゾクソウ ソウニュウ サンカブツ ヒフク ステンレス コウ ノ フショク

この論文をさがす

抄録

The Corrosion behavior of sputter-deposited ceramic coatings, part of which contained various pure metals in intermediate layers, was investigated. In films coated by RF sputtering, defects such as pinholes inevitably occurred. These defects play a significant role in corrosion. In this study, various oxide films were coated on stainless steel by RF sputtering and pinhole defects in coating films were evaluated using electrochemical measurement. Electrochemical measurement was to evaluate the total defect area of the film using the value of the critical passivation current density during anodic polarization in a 0.5kmol/m3 H2SO4+0.01kmol/m3 KSCN solution, which restricts substrate steel passivation. The results obtained are summarized as follows<br>(1) Ceramic coatings containing pure Al in intermediate layers showed better corrosion resisitance than other coatings.<br>(2) In single- and multilayer coatings, the value of the critical passivation current density decreased in the following sequence: single-layer>double-layer>multilayer containing pure metal in the intermediate layer.<br>(3) Coatings made in the suquence of oxide/metal/oxide had much better corrosion resistance than those in the sequence of oxide/oxide/metal.

収録刊行物

  • 表面技術

    表面技術 47 (8), 707-713, 1996

    一般社団法人 表面技術協会

参考文献 (17)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ