陽極酸化アルミナ層を担体とした 白金/アルミナプレート状触媒の触媒有効係数 Effectiveness Facotr of Pt/Alumina Plate Type Catalysts Using Anodized Alumina Layer as Catalyst Support
The effectiveness factor of Pt/Al<sub>2</sub>O<sub>3</sub>/Al plate catalyst was studied experimentally. The Pt/Al<sub>2</sub>O<sub>3</sub> catalyst layer, prepared by anodic oxidation and hot-water treatment, had a porous structure and a narrow pore-size distribution. Catalyst porosity was about 0.5 and the mean pore radius about 2nm. The rate of cyclohexane dehydrogenation reaction increased with the thickness of Pt/Al<sub>2</sub>O<sub>3</sub> catalyst layer to a certain peak, then the effectiveness factor decreased with thickness. This was because reactant diffusion into the catalyst layer was the controlling step. The observed reaction rate per apparent surface area is governed by the effective diffusion coefficient and the reaction rate constant. The reaction rate constant can be improved by augmenting the Pt content and Pt dispersion. The effective diffusion coefficient will be also improved with a large pore radius, which can be realized by controlling the anodized alumina layer pore structure.
- 表面技術 = The Journal of the Surface Finishing Society of Japan
表面技術 = The Journal of the Surface Finishing Society of Japan 47(8), 720-724, 1996-08
The Surface Finishing Society of Japan