高純度ムライトの泥漿鋳込成形とその焼結体の特性(第2報) -真空ろ過成形と焼結体の機械的特性- Slip Casting of Mullite and Properties of Sintered Body(Part2)-Vacuum Pressure Assisted Slip Casting and Mechanical Properties of Sintered Body-

この論文にアクセスする

この論文をさがす

著者

抄録

Slip casting of high purity mullite powder produced by coprecipitation method was studied to fabricate mullite ceramic parts with complicated shapes. The preparation conditions of well dispersed slurry (71mass% solids) was prepared by addition of deflocculant (0.2mass%), binder (0.3mass%) and defoamer (0.15mass%). Shaping of test pieces were used by the vaccum pressure assisted slip casting system with a porous polymer resin mold. The mechanical properties of the sintered body were investigated. High density mullite ceramics was obtained at 1650°C for 5hr. The sintered body of high purity mullite showed a flexural strength of about 290MPa and a Weibull modulus of 20.0 at room temperature.

収録刊行物

  • 粉体および粉末冶金  

    粉体および粉末冶金 44(11), 1061-1064, 1997-11-15 

    Japan Society of Powder and Powder Metallurgy

参考文献:  6件

参考文献を見るにはログインが必要です。ユーザIDをお持ちでない方は新規登録してください。

被引用文献:  1件

被引用文献を見るにはログインが必要です。ユーザIDをお持ちでない方は新規登録してください。

各種コード

  • NII論文ID(NAID)
    10002261753
  • NII書誌ID(NCID)
    AN00222724
  • 本文言語コード
    JPN
  • 資料種別
    ART
  • ISSN
    05328799
  • NDL 記事登録ID
    4344279
  • NDL 雑誌分類
    ZP41(科学技術--金属工学・鉱山工学)
  • NDL 請求記号
    Z17-274
  • データ提供元
    CJP書誌  CJP引用  NDL  J-STAGE 
ページトップへ