書誌事項
- タイトル別名
-
- Effects of Sintering and Paste-Baking Conditions on PTCR Characteristic of (Ba,Sr)TiO3 Vacuum-Sintered Compact Added with TiO2(Ti) powder.
- TiO2 Ti コナ テンカ Ba Sr Ti03 シンクウ ショウケツタイ ノ PTCR トクセイ ニ オヨボス ショウケツ オヨビ ペースト ヤキツケ ジョウケン ノ エイキョウ
この論文をさがす
抄録
The effects of sintering temperature (Ts; 1573-1748K) and time (ts; 0.6-14.4ks) and paste-baking-temperature or heating temperature (Tb or Th; 673-1273K; tb is 0.3ks) on PTCR characteristic were investigated for (Ba, Sr)Ti03 vacuum-sintered compact added with 3.9mass% TiO2(Ti) powder of 12.5mass% TiO2.<BR>The results obtained were as follows; (1)PTCR characteristic developed at all TS (ts=3.6ks, Tb=853K). The electrical resistivity at room temperature (ρrt) showed a minimum value of 1.8x 102Ω⋅cm and the ρmax/ρrt showed a maximum value of about 106 at 1723K. (2)For all ts(Ts=1623K, Tb=853K), PTCR characteristic developed. The ρrt showed a minimum value of 2.6x 103Ω.cm at 7.2ks. (3) At Tb above 823K (Ts=1623K, ts=3.6ks), PTCR characteristic developed. The ρrt showed a minimum value of 1.0x l03Ω⋅cm. (4)The ρ-T curve of (Ba, Sr)Ti03+TiO2(Ti) vacuum-sintered compact was affected more largely by TS, ts and Tb than that of (Ba, Sr)Ti03 air-sintered compact. This was considered to be mainly due to the porous and fine grained microstructure in the former compact.
収録刊行物
-
- 粉体および粉末冶金
-
粉体および粉末冶金 46 (4), 364-370, 1999
一般社団法人 粉体粉末冶金協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282681286024960
-
- NII論文ID
- 10002262260
-
- NII書誌ID
- AN00222724
-
- ISSN
- 18809014
- 05328799
-
- NDL書誌ID
- 4701503
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可