Effects of Metallic Iron Bearing Resources on Iron Ore Sintering

この論文にアクセスする

この論文をさがす

著者

    • YAMAKAWA Takuji
    • Process Technology Research Laboratories, Nippon Steel Corporation, Iron Making Division, Nakayama Steel Works Ltd.
    • HAYAKAWA Naoki
    • Process Technology Research Laboratories, Nippon Steel Corporation, Iron Making Division, Nakayama Steel Works Ltd.
    • NAGABUCHI Morio
    • Process Technology Research Laboratories, Nippon Steel Corporation, Iron Making Division, Nakayama Steel Works Ltd.

抄録

In order to clarify the effects of the use of resources containing metallic iron (MIRs) on the sintering process, plant tests have been conducted at Nakayama Steel. With an increase in MIRs, the following results were observed: <br>(1) Sinter yield and productivity deteriorated <br>(2) Emissions of NO<sub>x</sub> and SO<sub>x</sub> were reduced <br>(3) Sinter qualities changed depending on the kind of MIR <br>Pressure measurements of the sinter bed and CT observations of sintercake revealed that a decrease in porosity in the lower part of sintercake caused a decrease in permeability of the bed and an increase in the volume of an unsintered portion near the hearth layer. A decrease in fuel nitrogen and sulfur inputs in the sinter mix, which was caused by substituting metallic iron for coke breeze, reduced the emissions of NO<sub>x</sub> and SO<sub>x</sub>.

収録刊行物

  • ISIJ international  

    ISIJ international 38(1), 16-22, 1998-01-15 

    The Iron and Steel Institute of Japan

参考文献:  17件

参考文献を見るにはログインが必要です。ユーザIDをお持ちでない方は新規登録してください。

各種コード

ページトップへ