Analysis of Mold Wear during Continuous Casting of Slab.

DOI Web Site 被引用文献3件 参考文献35件
  • Won Young Mok
    School of Materials Science and Engineering and Center for Advanced Materials Research, Seoul National University
  • Yeo Tae-jung
    School of Materials Science and Engineering and Center for Advanced Materials Research, Seoul National University
  • Oh Kyu Hwan
    School of Materials Science and Engineering and Center for Advanced Materials Research, Seoul National University
  • Park Joong-kil
    Iron & Steel Making Research Team, Technical Research Laboratories, POSCO
  • Choi Joo
    Iron & Steel Making Research Team, Technical Research Laboratories, POSCO
  • Yim Chang Hee
    Iron & Steel Making Research Team, Technical Research Laboratories, POSCO

この論文をさがす

抄録

Using a 2-dimensional coupled thermo-elasto-plastic finite element model, the thermo-mechanical behaviours of the strand and mold were analyzed. The calculated geometry and temperature distributions of the solidifying shell and mold were compared with experimental observations. The calculated geometry around corner region was in good agreement with experimental observations. The mold wear was analyzed by a new dimensionless parameter of "Apparent Wear Parameter" which is inversely proportional to yield stress of the mold at service temperature and directly proportional to the interfacial pressure between the strand and mold. The effects of narrow face taper and carbon concentration of cast steel on mold wear were analyzed using the apparent wear parameter. With increasing narrow face taper, the possibility of mold wear increased due to increasing interfacial pressure. With increasing carbon concentration, the width of worn region of 35 mm at 0.05 and 0.1 wt% C steels decreased to 15 mm of 0.2 wt% C steel due to uniform thermal contraction of 0.2 wt% C steel during solidification. The calculated behaviours of mold wear were compared with used mold in industrial operation. The calculated worn region of mold based on the apparent wear parameter were in good agreement with industrial observations.

収録刊行物

被引用文献 (3)*注記

もっと見る

参考文献 (35)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ