Dephosphorization and Desulfurization Pretreatment of Molten Iron with CaO-SiO2-CaF2-FeO-Na2O Slags.

  • Hernandez Aurelio
    Metallurgy and Materials Department, Instituto Politecnico Nacional-ESIQIE
  • Romero Antonio
    Metallurgy and Materials Department, Instituto Politecnico Nacional-ESIQIE
  • Chavez Federico
    Metallurgy and Materials Department, Instituto Politecnico Nacional-ESIQIE
  • Angeles Miguel
    Metallurgy and Materials Department, Instituto Politecnico Nacional-ESIQIE
  • Morales R. D.
    Metallurgy and Materials Department, Instituto Politecnico Nacional-ESIQIE

Search this article

Abstract

The present work estimated the ability for the removal of phosphorus and sulfur from hot metal with CaO-SiO2-CaF2 fluxes which contain 20 mass% CaF2 and [mass% CaO/mass% SiO2]=4. Silicon losses were also determined along the treatment. Some additions of FeO (4 to 8 mass%) and Na2O (1 to 6 mass%) were used to change the oxygen potential of the molten iron. The experiments were carried out in an open 10 kg induction furnace using Al2O3 refractory in the temperature range 1350-1400°C.<br> The oxygen potentials of the melt, continuously measured with a high temperature galvanic cell, were between 10-13.4 atm (before the treatment) and 10-12.0 atm (after the treatment). FeO and Na2O contents in the slag directly affect the oxidation of the alloy elements of the liquid iron. With high silicon contents in the hot metal (0.6 %) the maximum removal of silicon was about 80 % whereas the maximum phosphorus and sulfur removal were about 14 and 90 %, respectively. By low silicon contents (0.16 %) the maximum removal of silicon, phosphorus and sulfur were 80, 40 and 95 %, respectively. <br> A thermodynamic analysis was carried out to predict the final composition of the hot metal and the species that were formed in the slag. Both results, calculated and experimental, show that sulfur and silicon were diminished in the melt in a higher extent than phosphorus and manganese. The species in the slag predicted by the model are in agreement with the X-ray analysis of the slag.

Journal

  • ISIJ International

    ISIJ International 38 (2), 126-131, 1998

    The Iron and Steel Institute of Japan

Citations (2)*help

See more

References(21)*help

See more

Details 詳細情報について

Report a problem

Back to top