Development of a High Speed Cold Rolling Oil with Mill Cleanness Property.
-
- Han Seog-Young
- Department of Mechanical Engineering, Hanyang University
-
- Song Kyo-Bong
- Bumwoo Institute of Technology Research
この論文をさがす
抄録
The purpose of this study was to develop a cold rolling oil with lubricity and mill cleanness property under the rolling conditions of high reduction ratio and high rolling speed. Seven kinds of test oils composed of various base oils, emulsifiers, EP additives, anti-oxidants etc. were blended. Evaluation of lubricity and anti-seizure property of the test oils was carried out with a laboratory scale rolling mill, where the contact conditions between work roll and strip are very close to those of an actual cold rolling mill. Laboratory evaluation for dispersibility, anti-contaminantion property, rust prevention property, residual carbon, etc. were carried out with several testers such as a long-term circulation tester, the oxidation stability tester and the Conradson residual carbon tester. Finally, a new high speed cold rolling oil with good lubricity and mill cleanness property was developed by referring to the previously developed high speed cold rolling oil.
収録刊行物
-
- ISIJ International
-
ISIJ International 38 (4), 366-370, 1998
一般社団法人 日本鉄鋼協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282681429524608
-
- NII論文ID
- 10002459193
-
- NII書誌ID
- AA10680712
-
- ISSN
- 13475460
- 09151559
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可