Continuous Cooling Transformation Behaviour of High Strength Microalloyed Steels for Linepipe Applications

この論文にアクセスする

この論文をさがす

著者

    • MANOHAR P. A.
    • Department of Materials Engineering, University of Wollongong
    • CHANDRA T.
    • Department of Materials Engineering, University of Wollongong

抄録

Continuous cooling transformation (CCT) behaviour of high strength microalloyed steels containing two different levels of Mn+Si additions is investigated in undeformed and thermomechanically processed conditions using quench and deformation dilatometry respectively. The deformation schedule used in the dilatometer is designed to simulate the industrial controlled rolling procedures for the production of plates as closely as possible in laboratory. CCT diagrams for the undeformed and thermomechanically processed steels are constructed. Effects of thermomechanical processing (TMP), accelerated cooling and composition (Mn+Si levels) on γ transformation start temperature (Ar<sub>3</sub>), phase transformation kinetics, CCT diagrams and microhardness are investigated. <br> The results show that TMP accelerates the onset of γ/α transformation (Ar<sub>3</sub> is raised), but the progress of γ/α transformation is retarded considerably in deformed samples. Significant retardation is observed during the final 30% of the phase transformation reaction. Increase in cooling rate lowers the Ar<sub>3</sub> significantly and accelerates the progress of transformation. The steel with a higher level of Mn+Si addition (1.96%) exhibits lower Ar<sub>3</sub>, sluggish transformation kinetics and higher hardnesses in undeformed and thermomechanically processed conditions as compared with the steel with a lower level of Mn+Si addition (1.17%). These effects are explained in terms of the effects of Mn and Si contents on the carbon partitioning and the subsequent phase transformation behaviour of these steels during continuous cooling. Increase in cooling rate increases the microhardnesses of both steels while TMP lowers them.

収録刊行物

  • ISIJ international

    ISIJ international 38(7), 766-774, 1998-07-15

    The Iron and Steel Institute of Japan

参考文献:  32件中 1-32件 を表示

  • <no title>

    WILLIAMS J. G.

    Proc. of Int. Conf. on Microalloying '95 117, 1995

    被引用文献1件

  • <no title>

    DE MEESTER B.

    ISIJ Int. 37, 537, 1997

    被引用文献2件

  • <no title>

    KORCHYNSKY M.

    Proc. of Int. Conf. on Microalloying '95 3, 1995

    被引用文献1件

  • <no title>

    GRONG O.

    Int. Met. Rev. 31, 27, 1986

    被引用文献12件

  • <no title>

    TAILLARD R.

    Matall. Trans. ASM 26A, 447, 1995

    被引用文献1件

  • <no title>

    LEE J. L.

    Mater. Sci. Technol 8, 236, 1992

    被引用文献1件

  • <no title>

    DEARDEN J.

    Trans. Inst. Weld. 3, 203, 1940

    被引用文献2件

  • <no title>

    ITO Y.

    IIW Doc. IX-576-68

    被引用文献1件

  • <no title>

    HONGTAO Z.

    Proc. of Int. Conf. on Microalloying '95 61, 1995

    被引用文献1件

  • <no title>

    AKBEN M. G.

    Acta Metall. 29, 111, 1981

    被引用文献9件

  • <no title>

    XIUQIU L.

    Proc. of Int. Conf. on HSLA Steels : Metallurgy and Applications 235, 1985

    被引用文献1件

  • <no title>

    KUROKAWA S.

    Met. Sci. J. 17, 433, 1983

    被引用文献1件

  • <no title>

    OUCHI C.

    Trans. Iron Steel Inst. Jpn. 22, 214, 1982

    被引用文献7件

  • <no title>

    HONEYCOMDE R. W.

    Proc. of Int. Conf. on Processing, Microstructure and Properties of HSLA Steels 1, 1988

    被引用文献1件

  • <no title>

    COHEN M.

    Proc. of Int. Conf. on HSLA Steels : Metallurgy and Applications 61, 1985

    被引用文献1件

  • <no title>

    MEYER L.

    Proc. of Int. Symp. Microalloying '75, Union Carbide Corp. 153, 1975

    被引用文献1件

  • <no title>

    PRIESTNER R.

    Met. Sci. J. 7, 60, 1973

    被引用文献1件

  • <no title>

    OAKWOOD T. G.

    Proc. of Int. Conf. on HSLA Steels : Metallurgy and Applications 715, 1985

    被引用文献1件

  • <no title>

    LIU S. K.

    Metall. Trans. ASM 21A, 1509, 1990

    被引用文献1件

  • <no title>

    KIRKALDY J. S.

    Proc. Int. Symp. Hardenability Concepts with Application to Steel 82, 1978

    被引用文献1件

  • <no title>

    LIU S. K.

    Metall. Trans. ASM 21A, 1517, 1990

    被引用文献1件

  • <no title>

    GRABKE H. J.

    Scr. Metall. 21, 1329, 1987

    被引用文献1件

  • <no title>

    SHIFLET G. J.

    Metall. Trans. ASM 12A, 1743, 1981

    被引用文献1件

  • <no title>

    REYNOLDS W. T.

    Metall. Trans. ASM 21A, 1479, 1990

    被引用文献1件

  • <no title>

    BHADESHIA H. K. D. H.

    Metall. Trans. ASM 10A, 895, 1979

    被引用文献1件

  • <no title>

    MANOHAR P. A.

    ISIJ Int. 36, 1486, 1996

    被引用文献2件

  • <no title>

    MANOHAR P. A.

    Proc. of Int. Conf. on Thermomechanical Processing of Steels and Other Materials-THERMEC '97, Wollongong, Australia 749, 1997

    被引用文献1件

  • <no title>

    LIU X.

    Proc. of Int. Conf. HSLA '95 253, 1995

    被引用文献1件

  • <no title>

    SANDBERG A.

    Proc. of Int. Conf. on Thermomechanical Processing of Microalloyed Austenite 405, 1982

    被引用文献1件

  • <no title>

    HONEYCOMBE R. W. K.

    Proc. of Int. Conf. on HSLA Steels : Metallurgy and Applications 243, 1985

    被引用文献1件

  • <no title>

    SELLARS C. M.

    Proc. of Int. Conf. on HSLA Steels : Metallurgy and Applications 73, 1985

    被引用文献1件

  • <no title>

    BRAMFITT B. L.

    Mstall. Trans. A. 21A, 817, 1990

    DOI 被引用文献11件

各種コード

ページトップへ