Effect of Nitrogen on Formation of Martensite-Austenite Constituent in Low Carbon Steels

この論文にアクセスする

この論文をさがす

著者

抄録

The effect of dissolved nitrogen on phase transformations and microstructural evolution in low-carbon high manganese silicon steel wire-rod was examined for varying nitrogen levels of 30, 70, and 100 ppm, while keeping the base composition constant. It was found that nitrogen suppresses the pearlite reaction start temperature by up to 30ºC. A strong correlation was discovered between the nitrogen level and the formation of martensite-austenite microconstituent (MA phase). The possible mechanisms by which nitrogen causes the formation of MA phase are discussed. The main conclusion drawn from this study is that levels of nitrogen between 70 and 110 ppm can have a significant effect on microstructure, such that up to approximately 10 vol% of MA phase is formed in these steels. Microstructural changes in titanium-microalloyed steels were also investigated-particularly changes in the development of the MA and pearlite phases. The pearlite content was up to double that found in a Ti-free alloy. Microalloying with titanium was found to be effective in completely eliminating MA phase.

収録刊行物

  • ISIJ international

    ISIJ international 39(2), 183-190, 1999-02-15

    The Iron and Steel Institute of Japan

参考文献:  27件中 1-27件 を表示

  • BHP Newcastle

    ARMITAGE S.

    Internal report (RMT395), 1995

    被引用文献1件

  • <no title>

    BAE C. M.

    Mater Sci. Technol. 10, 971, 1994

    被引用文献2件

  • <no title>

    BISS V.

    Metall. Trans. 2, 2267, 1971

    被引用文献1件

  • <no title>

    MATSUDA F.

    Weld. World 37(3), 134, 1996

    被引用文献1件

  • <no title>

    THOMPSON S. W.

    Metall. Trans. A 21A, 1493, 1990

    被引用文献7件

  • <no title>

    KATSUMATA M.

    Mater. Trans. JIM 32(8), 715, 1991

    被引用文献1件

  • <no title>

    PACEY A. J.

    Weld Metal. Fabric 46, 613, 1978

    被引用文献1件

  • <no title>

    BARNARD S. J.

    Advances in the Physical Metallurgy and Applications of Steels 3733, 1982

    被引用文献1件

  • <no title>

    YURIOKA N.

    Weld. World 35(6), 375, 1995

    被引用文献1件

  • BHPR Melb Lab.

    LOUIS R.

    Report No. BHPR/OE/R/009, 1995

    被引用文献1件

  • <no title>

    McCALLUM R.

    Wire J. Int. 27, 102, 1994

    被引用文献1件

  • <no title>

    LYTH C.

    Dept. of Scientific and Industrial Research, 1972

    被引用文献1件

  • Proc. ICSTIS. Suppl.

    GRUMBACH M.

    Trans. Iron Steel Inst. Jpn. 11, 1130, 1971

    被引用文献1件

  • <no title>

    BELL T.

    J. Iron Steel Inst. 428, 1967

    被引用文献1件

  • <no title>

    DUNNING J. D.

    J. Met. 40, 1994

    被引用文献1件

  • <no title>

    ITO Y.

    Sumitomo Search 21, 52, 1979

    被引用文献1件

  • <no title>

    MANDZIEJ S. T.

    Scr. Metall. 27, 793, 1992

    被引用文献1件

  • <no title>

    KAYALI E. S.

    Can. Metall. Q. 23(2), 227, 1984

    被引用文献1件

  • <no title>

    OLDLAND R. B.

    PhD Thesis, Monash University, 1985

    被引用文献1件

  • <no title>

    Atlas for Bainitic Microstructures, 1992

    被引用文献3件

  • <no title>

    VANDERVOORT G.

    Metallography Principles and Practice 174, 1984

    被引用文献1件

  • <no title>

    THOMPSON S. W.

    Metall. Mater. Trans. A 27A, 1557, 1996

    被引用文献1件

  • <no title>

    ZHANG F.

    Proc. of the Int. Symp. on Phase Transformations during the Thermal/Mechanical Processing of Steel 147, 1995

    被引用文献1件

  • <no title>

    THOMPSON S. W.

    Mater. Sci. Technol. 8, 777, 1992

    被引用文献2件

  • <no title>

    GLADMAN T.

    J. Iron Steel Inst. 1212, 1965

    被引用文献1件

  • <no title>

    LANGER E. W.

    Met. Sci. 2, 59, 1968

    被引用文献1件

  • Retained Austenite in 0.4C-Si-1.2Mn Steel Sheet Intercritically Heated and Austempered.

    Matsumura Osamu , Sakuma Yasuhiro , Takechi Hiroshi

    ISIJ International 32(9), 1014-1020, 1992

    J-STAGE DOI 被引用文献2件

各種コード

ページトップへ