書誌事項
- タイトル別名
-
- Study of Corona-Glow Discharge Transition Using Q-V Lissajous' and Dust-Figure Methods.
- デンカ デンアツ リサージュホウ ト ヒョウメン デンカ ズケイホウ オ ヘイヨウ シタ コロナ グロー ホウデン センイ トクセイ ノ ヒョウカ
この論文をさがす
抄録
Effect of airflow in the gap of the two planar electrodes on corona-glow discharge mode transition for a discharge generated in atmospheric air have been studied by using the Q-V Lissajous' and the Dust-Figure method. The discharge electrode consists of ITO (Indium-Tin-Oxide transparent electro-conductive coating) /Air (3 mm) /polycarbonate/Al. The discharge was generated by applying a peak-to-peak voltage of 16 kV with frequency of 60 Hz to the ITO electrode. By the airflow in the electrode gap, the discharge power increased from 0.4 W to 0.8 W. In the downstream area, corona discharge patterns observed by the Dust-Figure method became obscure. By observing the wettability of the polycarbonate sheet, it was found that the surface of the sheet was treated more effectively in the downstream area than in the upstream area. The results obtained in this experiment revealed that by the airflow the discharge in the downstream area is transferred from the corona to corona-glow mixture mode. It could be concluded that the airflow in the electrode gap is useful to accomplish an efficient treatment to a non-conductive surface without electrostatic charge up in the atmosphere.
収録刊行物
-
- 真空
-
真空 42 (3), 396-400, 1999
一般社団法人 日本真空学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679042120576
-
- NII論文ID
- 10002476667
-
- NII書誌ID
- AN00119871
-
- ISSN
- 18809413
- 05598516
-
- NDL書誌ID
- 4716509
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可