Continuous Casting of Bi-Pb and Bi-Pb-Sn Thermal Fuse Alloys by the Ohno Strip Casting Process
-
- Fujiwara Yasuyuki
- Department of Metallurgical Engineering, Chiba Institute of Technology
-
- Motoyasu Genjiro
- Department of Metallurgical Engineering, Chiba Institute of Technology
Bibliographic Information
- Other Title
-
- 上面開放加熱鋳型を用いた温度ヒューズ用ビスマス合金鋳塊の連続鋳造
- ウワツラ カイホウ カネツ イガタ オ モチイタ オンド ヒューズヨウ ビスマス ゴウキンチュウカイ ノ レンゾク チュウゾウ
Search this article
Abstract
The OSC apparatus has been constructed and used to examine the feasibility of continuously casting thermal fuse alloy strips. Cast surface quality of the strips, solid-liquid interface position and casting parameters such as casting speed, withdrawal angle and cooling conditions have been studied using Bi-45%Pb, Bi-44%Pb-1%Sn, and Bi-32%Pb-16%Sn alloys (all in mass%). It was confirmed that 2 mm thick and 50 mm wide strips could be produced by the OSC process. In order to maintain stable casting, the solid-liquid interface position must be located no closer than 0.5 mm from the cooling water. It was found that the solid-liquid interface position was closely related to the temperature and amount of cooling water. It was also found that the withdrawal angle of the strip must be kept slightly upward in order to obtain a good surface finish on the strip.
Journal
-
- Journal of the Japan Institute of Metals and Materials
-
Journal of the Japan Institute of Metals and Materials 63 (2), 152-159, 1999
The Japan Institute of Metals and Materials
- Tweet
Details 詳細情報について
-
- CRID
- 1390282681467415424
-
- NII Article ID
- 10002548755
-
- NII Book ID
- AN00187860
-
- ISSN
- 18806880
- 24337501
- 00214876
-
- NDL BIB ID
- 4659532
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed