書誌事項
- タイトル別名
-
- Relation Between Tensile Characteristics and Microstructure of Joint in Friction Welded Ductile Cast Iron
- マサツ アッセツ シタ キュウジョウ コクエン チュウテツ ノ ヒッパリ トク
この論文をさがす
抄録
Friction welding was applied to cast iron known to be a poor weldability material, and the possibility of cast iron joining was examined. Friction welding was carried out using a combination of FCD370 fellow and FCD370/S45C, and measurement of the interface temperature, microstructure observation and tensile test were performed. The results showed that the highest temperature obtained at the friction interface was 1413K, partial melting occurred in both combinations, but partially fused portion was extruded by the upset pressure from interface. As ferrite that was base microstructure moved closer to the joining interface in FCD370, the base microstructure of the joint changed to pearlite. Chills, martensites, abnormality of spheroidal graphite, cracks and inclusions were not observed. The same results were obtained in the combination of FCD370/S45C either. In the tensile test, all specimens were found to break on the base materials. The tensile test after annealing showed correlation of the graphite circularity rate of the interface and the tensile strength.
収録刊行物
-
- 鋳造工学
-
鋳造工学 70 (12), 873-877, 1998
公益社団法人 日本鋳造工学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282681484304256
-
- NII論文ID
- 10002554440
-
- NII書誌ID
- AN10514770
-
- ISSN
- 21855374
- 13420429
-
- NDL書誌ID
- 4626703
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可