-
- 片岡 征二
- 東京都立産業技術研究所
書誌事項
- タイトル別名
-
- Deep drawing process of aluminum alloy sheet with hydraulic counter pressure and vibration to tool system with use of volatile lubricants.
- キハツセイ ジュンカツユ オ モチイタ アルミニウム ゴウキンバン ノ シンド
この論文をさがす
抄録
A new deep drawing process with hydraulic counter pressure and vibration to tool system was applied to deep drawing of aluminum alloy sheet (A5052P–O) in order to improve the poor lubricity of volatile lubricants. To compare the drawability with that of A5052P–O sheet, the mild steel sheet (SPCC) was also examined. Four volatile lubricants, 6211, 6215F, 6221F, 6280 were tested. In case of lubrication with 6221F and 6280, the application of the new deep drawing process can make a remarkable increase in the limiting drawing ratio (L.D.R.) of A5052P–O up to about 2.1 and a remarkable reduction of the maximum punch load. In case of 6211 and 6215F, the application of the new deep drawing process can make an increase in the limiting drawing ratio up to about 2.0 in spite of very poor lubricity of the lubricants. The effect of the application of the new deep drawing process for SPCC was smaller than that of A5052P–O.
収録刊行物
-
- 軽金属
-
軽金属 48 (2), 78-82, 1998
一般社団法人 軽金属学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001206337060224
-
- NII論文ID
- 10002664429
- 10006403160
-
- NII書誌ID
- AN00069773
-
- COI
- 1:CAS:528:DyaK1cXhsV2rsLg%3D
-
- ISSN
- 18808018
- 04515994
- http://id.crossref.org/issn/04515994
-
- NDL書誌ID
- 4413750
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可