Ti-4.5%Al-3%-2%Fe-2%Mo合金の拡散接合特性 Diffusion bonding properties of Ti-4.5 mass%Al-3 mass%V-2 mass%Fe-2 mass%Mo alloy

この論文にアクセスする

この論文をさがす

著者

抄録

Studies of diffusion bonding were made for Ti–4.5Al–3V–2Fe–2Mo alloy sheets. The process conditions of pressure, temperature and time required to produce a mechanically sound bond were investigated for several surface finishes. The integrity of the bonds was evaluated using optical metallography, shear strength measurements and fractography. Sound bonds were produced in the pickled sheets in 4 h with an applied stress of 2.0 MPa at 800°C. In the polished sheets, the time and the temperature required were reduced to 2 h and 775°C, respectively, at the same stress. It was revealed that diffusion bonding of Ti–4.5Al–3V–2Fe–2Mo is attained around the same temperatures as those for its superplastic forming. A cellular panel was successfully produced with this alloy, combining its low temperature superplastic forming and diffusion bonding processes.

収録刊行物

  • 軽金属  

    軽金属 49(8), 368-372, 1999-08-30 

    The Japan Institute of Light Metals

参考文献:  11件

参考文献を見るにはログインが必要です。ユーザIDをお持ちでない方は新規登録してください。

被引用文献:  5件

被引用文献を見るにはログインが必要です。ユーザIDをお持ちでない方は新規登録してください。

各種コード

  • NII論文ID(NAID)
    10002666759
  • NII書誌ID(NCID)
    AN00069773
  • 本文言語コード
    JPN
  • 資料種別
    ART
  • ISSN
    04515994
  • NDL 記事登録ID
    4835074
  • NDL 雑誌分類
    ZP41(科学技術--金属工学・鉱山工学)
  • NDL 請求記号
    Z17-284
  • データ提供元
    CJP書誌  CJP引用  NDL  J-STAGE 
ページトップへ