Explosive Welding of a Thin Metallic Plate onto a Ceramic Plate Using Underwater Shock Wave.

  • Hokamoto K.
    Department of Mechanical Engineering and Materials Science, Kumamoto University
  • Fujita M.
    Department of Mechanical Engineering and Materials Science, Kumamoto University
  • Shimokawa H.
    Department of Mechanical Engineering and Materials Science, Kumamoto University

書誌事項

タイトル別名
  • Explosive Welding of a Thin Metallic Pl

この論文をさがす

抄録

Thin metallic plate was welded onto a ceramic plate using regulated underwater shock wave. The thin metallic plate was accelerated about 900 m/s by underwater shock wave and collided with ceramic plates, such as the ZrO2 ceramic plate. Bonding was achieved through intensive deformation at the collision point, but cracks were normally generated in the ceramic plate. The use of a cover plate with the metallic plate and other devices such as momentum traps was effective in eliminating cracks in the AI/ZrO2 joint.

収録刊行物

参考文献 (7)*注記

もっと見る

詳細情報

問題の指摘

ページトップへ