LiBr水溶液のサブクール領域における沸騰流熱伝達-第1報, 実験結果- [in Japanese] Flow Boiling Heat Transfer to Lithium Bromide Aqueous Solution in Subcooled Region(1st Report, Experimental Results) [in Japanese]
Access this Article
Search this Article
To improve the thermal performance of high temperature generator of absorption chiller/heater, heat transfer characteristics of flow boiling of lithium bromide aqueous solution in the subcooled region were experimentally investigated. Experiments were made for water and lithium bromide aqueous solution flowing in a rectangular channel (5 mm × 20 mm cross section) with one side wall heated. Boiling onset quality of lithium bromide aqueous solution is greater than that of water. The heat transfer coefficient of lithium bromide aqueous solution is about a half of that of water under the same experimental conditions of inlet velocity and heat flux. The experimental data of heat transfer coefficient for water are compared with the empirical correlation of Thom et al.<sup>11)</sup> and a fairly good agreement is obtained. The predictive calculations by the method of Sekoguchi et al.<sup>12)</sup> are compared with the data for water and lithium bromide aqueous solution. Agreement between them is good for water, while the results for lithium bromide aqueous solution are not satisfactory.
Trans.JSRAE 12(2), 191-200, 1995-07-31
Japan Society of Refrigerating and Air Conditioning Engineers