書誌事項
- タイトル別名
-
- Simple Method for Detecting Torque of an Induction Motor With a Synchronous Rectifier Circuit.
- ドウキ セイリュウ カイロ オ モチイタ 3ソウ ユウドウ デンドウキ ノ
この論文をさがす
抄録
There are many torque measuring methods for an induction motor. Some applications require a simple and easy method to detect torque change rather than a precise method to measure the torque of the motor. The torque of an induction motor is roughly estimated by the input current. This is the most simple method of measuring torque.<br>The input current of the induction motor is the sum of the torque current and the exciting current. The torque current is proportional to the synchronous-watt and the motor torque. The exciting current has a phase difference of almost 90 degree lag to the torque current, is variable with the input voltage and is larger than the torque current especially at a light load. Therefore, it is difficult to find motor torque from the input current of the motor at a light load.<br>In this paper, we propose a simple and easy torque measuring method with a synchronous rectifier circuit. The synchronous rectifier circuit can find a vector component at the detecting angle from the input current of the induction motor and detect the torque current in the input current of the motor. Adjusting the detecting angle of the synchronous rectifier, the rectified signal is mixed with the torque current and the exciting current in proper persentage and compensated for the fluctuation of the input voltage. It serves as a simple and easy torque measuring method suitable for trouble detection of the load such as under the life test.
収録刊行物
-
- 電気学会論文誌D(産業応用部門誌)
-
電気学会論文誌D(産業応用部門誌) 117 (3), 328-334, 1997
一般社団法人 電気学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679632084608
-
- NII論文ID
- 10002724056
-
- NII書誌ID
- AN10012320
-
- ISSN
- 13488163
- 09136339
-
- NDL書誌ID
- 4150054
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可