6000m級潜水調査船用海水ポンプの開発

DOI Web Site 被引用文献1件

書誌事項

タイトル別名
  • Development of Sea Water Pump for 6000m Deep Sea Submergence Search Vehicle
  • 6000mキュウ センスイ チョウサセンヨウ カイスイ ポンプ ノ カイハツ

この論文をさがす

抄録

A high performance sea water pump for a deep submergence research vehicle has been developed. This pump is small in size, light in weight, and capable of pumping 41/min. under the waser pressure equivalent to the depth of 6000m and operates at the high speed of 2250rpm. The pump is a three-throw reciprocating type with self-aligning plungers, and clearance seals. The pumping efficiency is 79% at the dischare pressure of 630kgf/cm^2, and the leakage from plunger seals is only about 60cc/min and was stable at the durability test for 500 hours. In order to develop the sea water pump, various studies as shown were performed. l) feasibility study on pump types 2) screening tests of plunger and cylinder liner for various material combinations of ceramics. 3) study to improve the manufacturing accuracy of plunger and cylinder liner. 4) photo-elastic stress analysis of valve block. The development of the pump of this kind shall be a great contribution to the 6000m deep submergence research vehicle project.

収録刊行物

  • 関西造船協会誌

    関西造船協会誌 190 (0), 1-9, 1983

    公益社団法人 日本船舶海洋工学会

被引用文献 (1)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ