EFFECTS OF GRINDING ON FORMATION OF MULLITE IN A SINTERED BODY AND ITS MECHANICAL AND THERMAL PROPERTIES

この論文にアクセスする

この論文をさがす

著者

抄録

Effects of dry grinding of a mixture composed of kaotinite and aluminum hydroxide in a tumbling ball mill on formation of mullite in a sintered body and its mechanical and thermal properties were investigated by X-ray diffraction method, TG-DTA, and measurements of bending strength and thermal expansion coefficient.<BR>Grinding of the mixture enables us to induce the structural change of the raw materials from a crystalline state into an amorphous state. About 192 h in grinding time is required to achieve an amorphous mixture, resulting in the formation of a mullite single phase at relatively low sintering temperature. When the crystalline state remains in the ground product, high temperature is needed to form a mullite single phase. The bending strength of the sintered bodies increases with an increase in not only sintering temperature but also grinding time of the mixture. Further, the thermal expansion coefficient of sintered bodies composed of mullite single phase, which is independent of grinding time, is much lower than that of different phases.

収録刊行物

  • Journal of chemical engineering of Japan

    Journal of chemical engineering of Japan 29(3), 456-463, 1996-06-30

    The Society of Chemical Engineers, Japan

参考文献:  24件中 1-24件 を表示

各種コード

  • NII論文ID(NAID)
    10003814510
  • NII書誌ID(NCID)
    AA00709658
  • 本文言語コード
    ENG
  • 資料種別
    ART
  • ISSN
    00219592
  • データ提供元
    CJP書誌  J-STAGE 
ページトップへ