鉱材の重研削加工に関連する研究

DOI Web Site 被引用文献1件

書誌事項

タイトル別名
  • Study on heavy grinding of a steel.
  • コウザイ ノ ジュウケンサク カコウ ニ カンスル ケンキュウ

この論文をさがす

抄録

In this study, a constant-load heavy grinding has been made using a specially designed snag grinding machine of 40 kW, where plate workpiece was used to keep pressure constant. The 455 mm dia. resinoid wheels were used for the experiment, and a 1 m long steel plate of different widths was used for workpiece. Thus, the effects of load, traverse speed, wheel width, work-piece width, and wheel type on grinding performance have been studied from standpoints of removal rate, wheel wear, G-ratio, and grinding force. It is evident that if load is identical the removal rate, as well as wheel wear rate, is always the same independently of wheel width or workpiece width. The ZS wheel is the best from a standpoint of stock removal, while the SR wheel showed the highest G-ratio. A wider workpiece causes higher tangential force for a given removal rate, while wheel width does not affect the force.

収録刊行物

  • 精密工学会誌

    精密工学会誌 52 (3), 540-546, 1986

    公益社団法人 精密工学会

被引用文献 (1)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ