湿式乾式組み合わせ法で合成したPb(Zr<i><sub>x</sub></i>Ti <sub>1−</sub><i><sub>x</sub></i>) <sub>1−</sub><i><sub>y</sub></i> (Mg<sub>1/3</sub>Nb<sub>2/3</sub>)<i><sub>y</sub></i>O<sub>3</sub>固溶体の機械的面質係数

DOI Web Site Web Site 参考文献11件

書誌事項

タイトル別名
  • Mechanical Quality Factor of Pb(Zr<i><sub>x</sub></i>Ti <sub>1−</sub><i><sub>x</sub></i>) <sub>1−</sub><i><sub>y</sub></i> (Mg<sub>1/3</sub>Nb<sub>2/3</sub>)<i><sub>y</sub></i>O<sub>3</sub> Solid Solution Prepared by Wet-Dry Combination Method
  • 湿式乾式組み合わせ法で合成したPb(ZrxTi1-x)1-y(Mg1/3Nb2/3)yO3固溶体の機械的品質係数
  • シッシキ カンシキ クミアワセ ホウ デ ゴウセイ シタ Pb ZrxTi1-x 1-y Mg1 3Nb2 3 yO3 コヨウタイ ノ キカイテキ ヒンシツ ケイスウ

この論文をさがす

抄録

<p>Perovskite solid solutions of Pb(ZrxTi1−x)1−y (Mg1/3Nb2/3)yO3 (PZTMN) without additives were prepared by wet-dry combination method in which the wet process was applied to the B-site cations (Zr4+, Ti4+, Mg2+, and Nb5+). Their mechanical quality factor (QM) was evaluated and compared with that of PZTMN prepared by the conventional dry method. Their values of QM are much higher than those for PZTMN prepared by the dry method. The improvement of QM is attributed to the improvement of sintered density. The wet-dry combination method is useful for the preparation of the solid solution having the high value of QM.</p>

収録刊行物

  • Electrochemistry

    Electrochemistry 67 (10), 985-987, 1999-10-05

    公益社団法人　電気化学会

参考文献 (11)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ