炭素繊維質多孔質体の調製とその熱リン酸中における耐食性評価

書誌事項

タイトル別名
  • Preparation of Carbonaceous Porous Materials from Carbon Fibers and Evaluation of Their Corrosion Resistance in Hot Phosphoric Acid
  • タンソ センイシツ タコウシツタイ ノ チョウセイ ト ソノ ネツ リンサン チュウ ニ オケル タイショクセイ ヒョウカ

この論文をさがす

抄録

<p>A study was conducted to evaluate corrosion resistance of carbonaceous porous materials made from various fibers and binder as an electrode substrate of phosphoric acid fuel cells. A great improvement in corrosion resistance was achieved by using a high performance carbon fiber as a filler material and by treating at higher temperatures to increase the graphitizability of final products. The corrosion of the product occurred mainly at the surface of fibers because the graphitizability of binder carbon was higher than that of fibers due to the great thermal stress applied during volume shrinkage of binder at carbonization process. Also it became clear that a high corrosion resistance was ensured by good adhesion between fibers and binders. For a product in which fibers separated from binder carbon, its corrosion resistance was low. By using a high performance carbon fiber and by achieving good adhesion of carbon fibers and binder carbon, other properties; e.g. thermal conductivity, electrical conductivity and mechanical strength were also improved greatly.</p>

収録刊行物

  • Electrochemistry

    Electrochemistry 68 (3), 181-187, 2000-03-05

    公益社団法人 電気化学会

被引用文献 (1)*注記

もっと見る

参考文献 (17)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ