書誌事項
- タイトル別名
-
- Fiber Break Behavior in Single Fiber Composites with Different Fiber Surface Treatments.
- ヒョウメン ショリ ノ コトナル タンイツ ガラス センイ フクゴウ ザイリョウ ノ センイハダンキョドウ
この論文をさがす
抄録
A single fiber fragmentation test is performed to investigate the effects of fiber surface treatment on fiber break behavior. Single glass fiber/epoxy composites with five different surface treatments are loaded in tension in the fiber direction. In-situ observation of the fiber fragmentation process is conducted by using an optical microscope equipped with a loading device. Fiber break density is measured as a function of applied strain. The microscopic failure around fiber breaks is also observed. It is seen that the fiber break behavior and the microscopic failure around fiber breaks are different with the fiber surface treatments. To interpret the experimental data, the authors' analysis of the stress transfer between the fiber and the matrix in a single fiber reinforced composite with fiber breaks is used. The analysis is based on a concentric cylinder model considering an interphase layer between the fiber and the matrix. By using the stress transfer analysis, fiber break density as a function of applied strain is predicted. By comparing between the experimental results and the analytical prediction, the validity of the analytical prediction is discussed.
収録刊行物
-
- 日本複合材料学会誌
-
日本複合材料学会誌 26 (2), 43-50, 2000
一般社団法人 日本複合材料学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679599728896
-
- NII論文ID
- 10004555118
-
- NII書誌ID
- AN00196748
-
- ISSN
- 18848559
- 03852563
-
- NDL書誌ID
- 5300217
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可