ブラウン管用内装塗布材料のガス脱離・吸着特性-黒鉛-ニ酸化チタン-水ガラス系を中心として- [in Japanese] Gas Desorption and Adsorption Properties of Inner Coating Materials Used for Cathode Ray Tube-Graphite, Titanium Oxide and Water Glass Mixed Material- [in Japanese]
Access this Article
Search this Article
The gas desorption properties of carbon based materials coated on inner wall of a cathode ray tube were examined by using a technique of thermal desorption spectroscopy (TDS). This material consists of graphite powder, titanium oxide (TiO<SUB>2</SUB>) powder and water glass. The major outgassing species observed in the temperature range from RT to 500°C were CO<SUB>2</SUB> and H<SUB>2</SUB>O. The major outgassing source was graphite. In order to reduce the gas desorption in the cathode ray tube, the heat treatment with temperature higher than 400-500°C is necessary.<BR>Since the surface morphology of graphite-water glass material was dense, the degassing was insufficient by baking treatment in the atmosphere. On the other hand, the degassing was very easy for graphite-TiO<SUB>2</SUB>-water glass material, because of the porous structure.<BR>The gas adsorption experiments were also conducted. The adsorption amount of H<SUB>2</SUB>O or CO<SUB>2</SUB> increased as the composition ratio of graphite powder. The gas adsorption capacity largely increased by the addition of TiO<SUB>2</SUB> powder into the graphite-water glass material. The enhancement of adsorption capacity is due to that the surface structure became porous and also the effective surface area large by the addition of TiO<SUB>2</SUB> powder.
- Journal of the Vacuum Society of Japan
Journal of the Vacuum Society of Japan 42(12), 1100-1105, 1999-12-20
The Vacuum Society of Japan