Effect of δFerrite on Sulfide Stress Cracking in a Low Carbon 13mass% Chromium Steel

Access this Article

Search this Article



It is important for the 13 mass% chromium steels to keep the passivation in order to improve SSC (Sulfide Stress Cracking) resistance in sour environments. For example, the addition of molybdenum and chromium is effective to keep the passivation. However, when these elements are excessively added, δ-ferrite is formed. Therefore, the effect of δ-ferrite on SSC in the low carbon 13 mass% chromium steels was investigated. SSC occurred in the case that δ-ferrite is formed to some extent because the corrosion potential was lowered to that of the active state. The occurrence of SSC did not depend on the difference of shape of δ-ferrite. The reason for the difference in corrosion potential with and without δ-ferrite is attributed to the existence of a chromium depleted zone due to the precipitation of chromium carbides or nitrides near the δ-ferrite.


  • Transactions of the Iron and Steel Institute of Japan  

    Transactions of the Iron and Steel Institute of Japan 40(11), 1134-1141, 2000-11-15 

    The Iron and Steel Institute of Japan

References:  13

You must have a user ID to see the references.If you already have a user ID, please click "Login" to access the info.New users can click "Sign Up" to register for an user ID.


Page Top