電解二酸化マンガン低温(75℃)生産工業化のための電極及び電解方法の改良

DOI Web Site Web Site 参考文献17件

書誌事項

タイトル別名
  • Improvement of Anode and Electrolysis Procedure for Industrialization of Electrolytic Manganese Dioxide Production at Low Temperature (75℃)
  • 電解二酸化マンガン低温(75℃)生産工業化のための電極及び電解法の改良
  • デンカイ 2サンカ マンガン テイオン 75ドC セイサン コウギョウカ ノ タメ ノ デンキョク オヨビ デンカイホウ ノ カイリョウ

この論文をさがす

抄録

<p>Graphite anode covered with titanium lattice (hybrid electrode) was found to be used as an anode in a large scale process of manufacturing electrolytic manganese dioxide (EMD) by electrolysis of MnSO4-H2SO4 solution using graphite anode and cathode, due to easy removal of deposited EMD from the anode surface without any mechanical destruction of the anode, which was very difficult in the case of using only graphite as an anode. The electrolysis at 75°C provided an advantage of protecting the graphite anode from electrochemical corrosion in addition to heat enegy saving compared with electrolysis at 95°C. Another electrolysis at 75°C was done on a suspension bath process using titanium anode and MnSO4-H2SO4 solution with and without suspended EMD powder. The electrode in a suspesion bath was found to work for a long time without passivasion during electrolysis due to the surface modification by means of the suspended particles, while in nonsuspended bath it was passivated immediately during electrolysis. These results show that the hybrid electrode, and the titanium electrode in the suspension bath process can be used for large-scale EMD production at 75°C.</p>

収録刊行物

  • Electrochemistry

    Electrochemistry 69 (7), 542-546, 2001-07-05

    公益社団法人　電気化学会

参考文献 (17)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ