書誌事項
- タイトル別名
-
- Modeling for Gasification of Polyethylene by Partial Combustion in Fluidized Bed with Conical Gas Distributor.
- エンスイガタ ガス ブンサンキ ツキ リュウドウソウ ニ ヨル ポリエチレン ブブン ネンショウ ガスカ ノ モデル カイセキ
この論文をさがす
抄録
A simulation model for gasification of polyethylene (HDPE) pellet in a fluidized bed with a conical gas distributor is proposed. The model is based on the enthalpy balance and the material balance for the gasification process, assuming the spout, the annulus and the dilute phase are three perfect mixed phases. First a reaction temperature is calculated through the enthalpy balance and then the conversion of HDPE to each gas is calculated by using the reaction temperature.<BR>The comparison between calculated and experimental values reveals that the model is applicable to predict gas yield in the fluidized bed gasifier with a conical gas distributor. The gasification characteristics such as reaction ratio of the dense phase in the bed and partial combustion ratio of HDPE are examined to clarify the characteristic of gasification of HDPE in the fluidized bed with a conical gas distributor.
収録刊行物
-
- 化学工学論文集
-
化学工学論文集 26 (4), 588-595, 2000
公益社団法人 化学工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204510268928
-
- NII論文ID
- 10006949098
-
- NII書誌ID
- AN00037234
-
- COI
- 1:CAS:528:DC%2BD3cXlsVKgsLk%3D
-
- ISSN
- 13499203
- 0386216X
- http://id.crossref.org/issn/0386216X
-
- NDL書誌ID
- 5403117
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可