Tool Wear in Cutting of Sintered Iron Material.

• Wada Tadahiro

  Department of Mechanical Engineering, Nara National College of Technology

• Sakurai Masatoshi

  OSG Corporation

• Ogura Akihiko

  OSG Corporation

Bibliographic Information

Other Title

• 焼結鉄材切削における工具摩耗
• ショウケツ テツザイ セッサク ニ オケル コウグ マサツ

Abstract

The tool life in turning of the sintered materials such as sintered steel becomes shorter than that in turning of the melted steels such as carbon steel. In order to clarify the effective tool materials for the turning, the tool wear etc. in the turning of the sintered iron material was experimentally investigated. The sintered iron material was turned with the various tool materials at the cutting speed 5.0m/s. The main results obtained are as follows: (1) In the PVD/CVD coated cemented carbide tools, the wear progress of the TiVN PVD coated cemented carbide tool was slowest. (2) In the four kinds of ceramics tools, the wear progress of the Si₃N₄ ceramics tool was slowest. And, the wear progress of the Si₃N₄ ceramics tool became slower than that of the TiVN PVD coated cemented carbide tool. (3) The main wear mechanisms of the ceramics tools were the abrasive wear.

Journal

• Journal of the Japan Society of Powder and Powder Metallurgy

  Journal of the Japan Society of Powder and Powder Metallurgy 48 (5), 386-391, 2001

  Japan Society of Powder and Powder Metallurgy

Keywords

• turning
• sintered iron material
• tool wear
• ceramics tool
• coated cemented carbide tool

Details

• CRID: 1390001206307210112
• NII Article ID: 10007482881
• NII Book ID: AN00222724
• DOI: 10.2497/jjspm.48.386
• COI: 1:CAS:528:DC%2BD3MXksF2gsL4%3D
• ISSN: 18809014
• ISSN: 05328799
• ISSN: http://id.crossref.org/issn/05328799
• NDL BIB ID: 5773221
• Web Site: https://ndlsearch.ndl.go.jp/books/R000000004-I5773221
• Text Lang: ja
• Data Source:
  • JaLC
  • NDL
  • Crossref
  • CiNii Articles
• Abstract License Flag: Disallowed