書誌事項
- タイトル別名
-
- Mezzo-Heterogeneous Microstructural Control for High Performance Sintered Low Alloy Steels. 2nd report.
- ショウケツ テイゴウキン コウ ノ コウセイノウカ ニ ムケタメゾヘテロ ソシキ セイギョ ダイ2ホウ
この論文をさがす
抄録
In the previous report on the sintered low alloy steels (4600grade, 0.4mass%C) produced by MIM process varying Ni content from 0 to 8 mass%, the mechanical properties were improved significantly with increasing Ni content to 6mass%. This was attributed to the solution strengthening and the mezzo-heterogeneous microstructure which were consisted of Ni rich martensite surrounded by a network of tempered martensite. However, the tensile and fatigue strength of the steel added 8 mass% Ni were dropped by the increase of retained austenite. In this study, the effect of the different type of Ni powders on the mechanical properties of Fe-6Ni-0.5Mo-0.2Mn (mass%) was investigated to clarify and optimize the mezzo-heterogeneous microstructure.<BR>The tensile properties of the heat treated steels using the spherical Ni powder were lower than those using the spiky Ni powder. This seems to be due to the segregated distribution considerably of Ni rich phase and the decrease of Ni diffusion rate.
収録刊行物
-
- 粉体および粉末冶金
-
粉体および粉末冶金 48 (5), 451-455, 2001
一般社団法人 粉体粉末冶金協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001206307201536
-
- NII論文ID
- 10007482997
-
- NII書誌ID
- AN00222724
-
- COI
- 1:CAS:528:DC%2BD3MXksF2nt74%3D
-
- ISSN
- 18809014
- 05328799
- http://id.crossref.org/issn/05328799
-
- NDL書誌ID
- 5773561
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可