Potential Linkage between the Plug Region and an End Plate in GAMMA 10.
-
- SAITO Teruo
- Plasma Research Center, University of Tsukuba
-
- TATEMATSU Yoshinori
- Plasma Research Center, University of Tsukuba
-
- KATANUMA Isao
- Plasma Research Center, University of Tsukuba
-
- YATSU Kiyoshi
- Plasma Research Center, University of Tsukuba
この論文をさがす
抄録
In GAMMA 10, the plasma potential at the plug region, which is generated by fundamental ECRH, is linked to the end plate potential. There are two factors in this linkage. One is the field-aligned flow of warm electrons driven into the loss cone by ECRH. The other is a finite current through the end plate. This current is connected to an ion current, which is detected on annular electrodes in the end mirror cell where the plug potential is formed. An experimental attempt to externally control this current was performed by varying the resistance connecting the end plate to the vacuum vessel, and a picture of current circulation was obtained. In this circuit, ECRH generates an electromotive force by driving the axial flow of electrons. This electromotive force is divided into the positive plug potential and the negative end plate potential, respectively as measured from the vacuum vessel to meet the condition of a closed circuit.
収録刊行物
-
- プラズマ・核融合学会誌
-
プラズマ・核融合学会誌 78 (6), 591-598, 2002
社団法人 プラズマ・核融合学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282681488490880
-
- NII論文ID
- 10008841062
-
- NII書誌ID
- AN10401672
-
- COI
- 1:CAS:528:DC%2BD38XmtVChu78%3D
-
- NDL書誌ID
- 6193798
-
- ISSN
- 09187928
- http://id.crossref.org/issn/09187928
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可