Effect of Alcohol Solvents for Glycidyl Methacrylate in Radiation-Induced Graft Polymerization on Performance of Cation-Exchange Porous Membranes.

  • Okamura Daisuke
    Department of Materials Technology, Chiba University
  • Saito Kyoichi
    Department of Materials Technology, Chiba University
  • Sugita Kazuyuki
    Department of Materials Technology, Chiba University
  • Tamada Masao
    Takasaki Radiation Chemistry Research Establishment, Japan Atomic Energy Research Institute
  • Sugo Takanobu
    Takasaki Radiation Chemistry Research Establishment, Japan Atomic Energy Research Institute

Bibliographic Information

Other Title
  • 放射線グラフト重合法におけるグリシジルメタクリレートモノマーのアルコール溶媒がカチオン交換多孔性膜の性能に及ぼす効果
  • ホウシャセン グラフト ジュウゴウホウ ニ オケル グリシジルメタクリレートモノマー ノ アルコール ヨウバイ ガ カチオン コウカン タコウセイ マク ノ セイノウ ニ オヨボス コウカ

Search this article

Abstract

An epoxy-group-containing monomer, glycidyl methacrylate (GMA), was grafted onto a porous hollow-fiber membrane made of polyethylene, by radiation-induced graft polymerization. Four kinds of alcohol, i.e., methanol, ethanol, 1-propanol, and 1-butanol, were employed as the solvents for GMA. Grafting rate of GMA was decreased with increasing carbon number of alcohols. The epoxy group of the GMA-grafted membrane with a degree of grafting of 90 or 120% was converted to a sulfonic acid group at a molar conversion of 10 to 12%. Hen-egg lysozyme (HEL) dissolved in carbonate buffer solution (pH 9.0) was forced to permeate through the pores of the sulfonic-acid-group-containing porous hollow-fiber membranes prepared with various alcohol solvents. The binding capacity of HEL onto the membrane in equilibrium with the feed concentration of 0.5 g-HEL/L increased with the increase in the carbon number of alcohols. For example, the binding capacities of the membranes prepared with methanol and 1-butanol were 0.18 and 0.38 g-HEL/g-membrane, respectively. In contrast, the flux of the protein solution was decreased with increasing carbon number of alcohols. This demonstrates that longer polymer brushes are formed on the pore surface of the membrane prepared with a higher carbon number of alcohol employed as the solvent for GMA.

Journal

  • MEMBRANE

    MEMBRANE 27 (4), 196-201, 2002

    THE MEMBRANE SOCIETY OF JAPAN

Citations (2)*help

See more

References(12)*help

See more

Details 詳細情報について

Report a problem

Back to top