書誌事項
- タイトル別名
-
- Study on Hot Machining of Brittle Materials.
- コウゼイ ザイリョウ ノ コウオン セッサク ニ カンスル ケンキュウ
この論文をさがす
抄録
This paper describes the mechanism of brittle-ductile transition of monocrystal silicon at a high temperature and its feasibility for ductile mode cutting. The micro-cutting tests were carried out at various temperatures, and for various cutting speeds and depth of cut by using a newly developed cutting device. The critical depth of cut is closely related to the material temperature and cutting speed. When the material temperature is 973K at a cutting speed of 1mm/s, the critical depth of cut is about two times that at room temperature. The critical depth of cut decreases with increasing in cutting speed. The specific cutting force is nearly constant at various temperatures. The residual stress on the ductile-mode cutting surface is compressive about 200MPa.
収録刊行物
-
- 精密工学会誌
-
精密工学会誌 64 (12), 1831-1835, 1998
公益社団法人 精密工学会
- Tweet
キーワード
詳細情報
-
- CRID
- 1390001204765743872
-
- NII論文ID
- 110001372354
- 10010080364
-
- NII書誌ID
- AN1003250X
-
- ISSN
- 1882675X
- 09120289
-
- NDL書誌ID
- 4620810
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可