書誌事項
- タイトル別名
-
- Relationship between Strength Degradation and Grain Depth of Cut during Grinding Si<sub>3</sub>N<sub>4</sub>
- チッカ ケイソ セラミックス ノ ケンサク カコウ ニ オケル トリュウ キリ
この論文をさがす
抄録
The strength degradation of silicon nitride ceramics up-cut surface ground under different conditions were studied by specific grinding energy and maximum grain depth of cut statistically analyzed by new direct evaluation method of successive cutting point spacing. Main results are summarized as follows; (1) Strength decreases with increase in wheel depth of cut and with decrease in specific grinding energy, and dose not depend on the change of table speed under the grinding conditions with a wheel including large grain size (#100; grain diameter=125-150μm). (2) Strength degradation is much large by 70-80% compared to inherent strength of the work at the range of more than 0.5-1.0μm in mean value of maximum grain depth of cut.
収録刊行物
-
- Journal of the Ceramic Society of Japan (日本セラミックス協会学術論文誌)
-
Journal of the Ceramic Society of Japan (日本セラミックス協会学術論文誌) 103 (1196), 335-339, 1995
公益社団法人 日本セラミックス協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282680254569088
-
- NII論文ID
- 110002291116
- 10010081022
-
- NII書誌ID
- AN10040326
-
- ISSN
- 18821022
- 09145400
- http://id.crossref.org/issn/09145400
-
- NDL書誌ID
- 3614856
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可