Ca添加機械構造用鋼の切削における超硬工具摩耗抑制効果

DOI Web Site Web Site 参考文献37件

書誌事項

タイトル別名
  • Wear Reduction of Carbide Tools Observed in Cutting Ca-added Steels for Machine Structural Use
  • Ca テンカ キカイ コウゾウヨウ コウ ノ セッサク ニ オケル チョウコウコウグ マモウ ヨクセイ コウカ

この論文をさがす

抄録

The effect of Ca addition for improving machinability in carbide tool machining operation has been widely known. It has been proposed that oxide inclusions, which would work as "belag" on the tool surface during machining operation, has been responsible for this effect. In recent years, when Ca-treated steels containing higher sulfur are machined, MnS has been observed to form on the rake face, and this "inclusion layer, " instead of the oxide belag, would serve favorably for machinability.<BR>In this paper, we have investigated the influence of several inclusions and the addition of Ca and/or Mg on rake face wear of carbide tools. The rake face wear of Ca-added steel was appreciably reduced due to the MnS inclusion layer formed on the rake face. However, the concurrent addition of Ca and Mg to the steel did not improve the rake face wear. Combined with a TEM observation in a cross section of MnS layer formed on the rake face, these results are understood by the different nature of oxide inclusions in terms of abrasive wear.

収録刊行物

  • 鉄と鋼

    鉄と鋼 91 (8), 639-646, 2005

    一般社団法人 日本鉄鋼協会

参考文献 (37)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ