Quality Improvement of Steel Pipes Produced by Seam Welding with New Magneto-Dielectric Impeder

• Milicevic Miroslav

  Bul. Nemanjica 33/39

• Radakovic Zoran

  Department of Electrical Engineering, University of Belgrade

抄録

The standard technology of steel pipe production is the high frequency (HF) inductive welding. A mechanically formed profile is introduced into an inductor. Inside the pipe, in the position of the inductor there is an impeder, whose function is to form a suitable distribution of the electromagnetic and temperature field. In previous paper of the authors, the new magneto-dielectric (MD) material for the impeder is proposed and results of extraordinary energy saving are shown.<BR>This paper treats the aspect of the pipe quality, which represent the essential parameter in a production technology. The analyses were made for the widely spread ferrite impeder and for the proposed MD impeder. From this point of view, the MD impeder appeared to be advantageous material also. In addition to the standard mechanical tests of pipes quality, extensive chemical and physical analyses of the material in the weld, as well as in the basic section of the pipe, have been performed. The aim of the investigation was to explain the bad results in the standard flattening and hydrostatic testing of pipes produced using the ferrite impeder of TDK-IP1 type.

収録刊行物

• MATERIALS TRANSACTIONS

  MATERIALS TRANSACTIONS 47 (6), 1464-1468, 2006

  公益社団法人 日本金属学会

キーワード

• high frequency inductive welding
• ferrite
• magneto-dielectric
• impeder
• testing of welding

詳細情報

• CRID: 1390282679227448064
• NII論文ID: 130004453155
• NII論文ID: 10018160285
• NII書誌ID: AA1151294X
• DOI: 10.2320/matertrans.47.1464
• ISSN: 13475320
• ISSN: 13459678
• NDL書誌ID: 7950644
• Web Site: https://ndlsearch.ndl.go.jp/books/R000000004-I7950644
• Web Site: https://www.jstage.jst.go.jp/article/matertrans/47/6/47_6_1464/_pdf
• 本文言語コード: en
• データソース種別:
  • JaLC
  • NDL
  • Crossref
  • CiNii Articles
• 抄録ライセンスフラグ: 使用不可