個別VQC装置への目標電圧指令による中央VQC方式 A Central VQC Method based on Target Voltage Control for Local Voltage Control Devices
The authors have developed a new central VQC (Voltage Q(reactive power) Control) method that cooperates with local voltage control devices AVQC (Automatic V-Q Controller). Each AVQC, located at principal substations or power stations, brings bus voltage close to its target voltage independently by controlling the on-load tap changers and shunt capacitors and reactors status. Each target bus voltage is optimally determined through on-line optimal power flow calculation to minimize active power transmission losses in the bulk power grid. Using this central VQC method, efficient voltage control is realized in comparison with the conventional VQC since the target voltage is updated continuously in accordance with the current power grid state. The voltage control function employing the described method has been already implemented into the energy management system at Tohoku EPCO and has been in operation from 2004.<br>This paper presents the newly developed method for central VQC and its excellent performance through bus voltages behaviors at the real Tohoku EPCO power grid.
- 電気学会論文誌. B, 電力・エネルギー部門誌 = The transactions of the Institute of Electrical Engineers of Japan. B, A publication of Power and Energy Society
電気学会論文誌. B, 電力・エネルギー部門誌 = The transactions of the Institute of Electrical Engineers of Japan. B, A publication of Power and Energy Society 126(8), 783-788, 2006-08-01
The Institute of Electrical Engineers of Japan