Temperature-Time-Transformation Curve and Viscous Flow Deformation of Zr55Cu30Al10Ni5 Bulk Glassy Alloy

書誌事項

タイトル別名
  • Temperature-Time-Transformation Curve and Viscous Flow Deformation of Zr<SUB>55</SUB>Cu<SUB>30</SUB>Al<SUB>10</SUB>Ni<SUB>5</SUB> Bulk Glassy Alloy

この論文をさがす

抄録

The temperature-time-transformation curve of a Zr55Cu30Al10Ni5 bulk glassy alloy was obtained by isothermal DSC measurements. High temperature compression tests were carried out to investigate the viscous flow behavior of the Zr55Cu30Al10Ni5 bulk glassy alloy. The influence of four process parameters (temperature, time, initial stress, strain rate) on viscous flow deformation of the bulk glassy alloy was studied. X-ray diffractometry (XRD) was used to examine a glassy state of the glassy alloy samples subjected to viscous flow deformation. Appropriate parameters of viscous flow leading to a good deformation process were proposed. The relative displacement over 80% was obtained by compressing for 200 s at 723 K under a pressure of 160 MPa with a strain rate of 1.32×10−2 s−1. The XRD results showed the absence of crystal peaks after viscous flow deformation under the condition being suggested.

収録刊行物

被引用文献 (3)*注記

もっと見る

参考文献 (37)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ