アルミニウム合金製の被着体を用いたアクリル系接着剤強度の温度および負荷速度依存性の評価 Evaluation of temperature and load rate dependence for strength of an acrylic adhesive resin in aluminum alloy joints

この論文にアクセスする

この論文をさがす

著者

抄録

An impact test equipment was developed. This equipment is able to produce comparatively low load rate of impact. The impact strength of the acrylic adhesive under low temperature was measured using the developed impact test equipment. By using aluminum alloy as adherend, the equipment can measure the impact strength of acrylic adhesive. The tensile strength of the adhesive under various load rate and low temperature were measured. Conventional equipments were also used for these tests. Relations between the load rate, the test temperature and the tensile strength of adhesive were investigated. As an experimental result, at any case of load rate the tensile strength of the acrylic adhesive increased once with temperature decrease. However, when the temperature decreased lower than a specific value, the strength of the adhesive decreased. The temperature that the strength of the adhesive becomes maximum rises with the increase of the load rate. The change of strength of the acrylic adhesive is influenced by the viscosity of the adhesive itself.

収録刊行物

  • 軽金属  

    軽金属 57(1), 6-11, 2007-01-30 

    The Japan Institute of Light Metals

参考文献:  20件

参考文献を見るにはログインが必要です。ユーザIDをお持ちでない方は新規登録してください。

各種コード

  • NII論文ID(NAID)
    10018494927
  • NII書誌ID(NCID)
    AN00069773
  • 本文言語コード
    JPN
  • 資料種別
    ART
  • ISSN
    04515994
  • NDL 記事登録ID
    8659505
  • NDL 雑誌分類
    ZP41(科学技術--金属工学・鉱山工学)
  • NDL 請求記号
    Z17-284
  • データ提供元
    CJP書誌  NDL  J-STAGE 
ページトップへ