Reduction of CO_2 Emissions from Integrated Steelmaking by Optimised Scrap Strategies : Application of Process Integration Models on the BF-BOF System

この論文にアクセスする

この論文をさがす

著者

    • RYMAN Christer
    • Centre of Process Integration in Steelmaking, MEFOS-Metallurgical Research Institute AB
    • LARSSON Mikael
    • Centre of Process Integration in Steelmaking, MEFOS-Metallurgical Research Institute AB

抄録

In integrated steelmaking there are a number of means to reduce CO<sub>2</sub> emissions. One approach is to increase the metallic Fe input to the production system. A common belief is that scrap works as a CO<sub>2</sub> diluent when introduced in iron ore based steelmaking. It is not necessarily so. Scrap is a key supplementary charge material in oxygen steelmaking converters, but scrap can also be utilised in ironmaking where it will decrease the use of reducing agents and with that also the specific CO<sub>2</sub> emissions. By the use of a process integration model which basically includes the primary processes of cokemaking, sintering, ironmaking and oxygen steelmaking the overall influence of scrap input on CO<sub>2</sub> emissions is demonstrated and commented. The influence of hot metal silicon content is elucidated by calculations with different material and process constraints. The results show that at moderate scrap rates, the reduction of CO<sub>2</sub> emissions is favoured by increased scrap additions to the oxygen converter. When the scrap additions to the converter balances the actual heat capacity of the bath, other means to achieve an increased scrap melting capacity can be taken into account. This include combinations of scrap addition to the blast furnace, increased silicon content in tapped hot metal, and/or addition of Ferro-silicon combined with further scrap additions to the oxygen converter. Different strategies for CO<sub>2</sub> emission reduction have to be suggested depending on if the objective is to minimise the site (direct) emissions or the global (indirect+direct) emissions.

収録刊行物

  • ISIJ international

    ISIJ international 46(12), 1752-1758, 2006-12-15

    The Iron and Steel Institute of Japan

参考文献:  10件中 1-10件 を表示

  • <no title>

    Int. Iron and Steel Institute Committee on Technology

    Energy Use in the Steel Industry, 1998

    被引用文献1件

  • <no title>

    FEINMAN J. ed.

    Direct Reduced Iron-Technology and Economics of Production and Use, 1999

    被引用文献1件

  • <no title>

    RYMAN C.

    Proc. of 2nd Int. Conf. on New Developments in Metallurgical Process Technology, 2004, 2004

    被引用文献1件

  • <no title>

    GRIP C. E.

    Proc. 84th Steelmaking Conf., 2001, 2001

    被引用文献1件

  • <no title>

    LARSSON M.

    Proc. SCANMET II-Proc. of 2nd Int. Conf. on Process Development in Iron- and Steelmaking, 2004 1, 301, 2004

    被引用文献1件

  • <no title>

    AICHINGER H. M.

    60th Ironmaking Conf. Proc., 2001, 2001

    被引用文献1件

  • <no title>

    MONSEN B. E.

    56th Electric Furnace Conf. Proc., 1998, 1998

    被引用文献1件

  • <no title>

    EDWARDS L.

    Proc. of the 4th European Oxygen Steelmaking Conf., 2003, 2003

    被引用文献1件

  • <no title>

    RUSSO T.

    Iron Steel Technol. 2(11), 89, 2005

    被引用文献1件

  • Reduction of the Specific Energy Use in an Integrated Steel Plant-The Effect of an Optimisation Model

    LARSSON Mikael , DAHL Jan

    ISIJ international 43(10), 1664-1673, 2003-10-15

    J-STAGE DOI 参考文献10件 被引用文献1件

各種コード

ページトップへ