書誌事項
- タイトル別名
-
- Influence of Temperature on Erosion by a Cavitating Liquid Jet
- キャビテーション フンリュウホウ ニ ヨル カイショク ニ オヨボス エキオン ノ エイキョウ
この論文をさがす
抄録
The influence of water temperature on cavitation erosion has been studied using a vibratory apparatus, but no researches has been conducted at a constant cavitation number in flow condition.This study deals with the influence of water temperature on cavitation erosion using a cavitating liquid jet apparatus. The optimum stand-off distance at 25°C was 11, 15, 21 and 25 mm at cavitation number of σ=0.03, 0.025, 0.02 and 0.015, respectively, and was almost the same as that of a guideline in ASTM G 134 standard. The optimum stand-off distance at 75°C is similar to that at 25°C. The erosion rate increases with liquid temperatures and reaches a peak, followed by a decrease. The peak appears at the approximate average of freezing and boiling temperatures. The relative temperature was defined as 0°C for breezing temperature and 100°C for boiling temperature under the pressurized water. The erosion rate increases at 1%/°C between 5 and 45°C of relative temperatures, and decreases at 2%/°C between 45 and 80°C.
収録刊行物
-
- 日本機械学会論文集A編
-
日本機械学会論文集A編 71 (707), 1081-1087, 2005
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679456409216
-
- NII論文ID
- 10018749323
- 110004999051
-
- NII書誌ID
- AN0018742X
-
- COI
- 1:CAS:528:DC%2BD2MXhtVKhsLfN
-
- ISSN
- 18848338
- 03875008
-
- NDL書誌ID
- 7432528
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可