Determination of trace heavy metals by sequential injection-anodic stripping voltammetry using bismuth film screen-printed carbon electrode
この論文をさがす
抄録
<p>A sequential injection-square-wave anodic stripping voltammetry (SIA-SWASV) is proposed for the simultaneous determination of Pb(II), Cd(II) and Zn(II), employing an in situ plated bismuth film screen-printed carbon electrode (Bi-SPCE) as a working electrode and hydrochloric acid as a supporting electrolyte. Bi(III) and analyte metal ions were on-line deposited onto a SPCE at -1.4 V vs. Ag/AgCl for 180 s. At a stopped flow, a square-wave voltammogram was recorded from -1.3 to 0 V vs. Ag/AgCl. The experimental conditions were optimized. Under the optimum conditions, the linear ranges were 0 - 70 mu g L-1 for Pb(II) and Cd(II), and 75 - 200 mu g L-1 for Zn(II). The limits of detection (S/N = 3) were obtained at concentrations as low as 0.89 mu g L-1 for Pb(II) and 0.69 mu g L-1 for Cd(II) for a 180-s deposition time. The proposed method was applied to the determination of Pb(II), Cd(II) and Zn(II) in water samples with satisfactory results.</p>
収録刊行物
-
- Analytical Sciences
-
Analytical Sciences 24 (5), 589-594, 2008-05-10
Tokyo : Japan Society for Analytical Chemistry
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1050846637478669952
-
- NII論文ID
- 10021099981
-
- NII書誌ID
- AA10500785
-
- ISSN
- 09106340
-
- NDL書誌ID
- 9483019
-
- 本文言語コード
- en
-
- 資料種別
- journal article
-
- データソース種別
-
- IRDB
- NDL
- CiNii Articles