Characteristics of Creeping Discharge Developed in Narrow Gap on a Filamentous Backside Electrodes

DOI Web Site Web Site 3 Citations 23 References
  • Hirata Tomoyuki
    Department of Electrical Engineering and Computer Sciences, Graduate School of Engineering, University of Hyogo
  • Koga Mitsumasa
    Department of Electrical Engineering and Computer Sciences, Graduate School of Engineering, University of Hyogo
  • Ueno Hideki
    Department of Electrical Engineering and Computer Sciences, Graduate School of Engineering, University of Hyogo
  • Nakayama Hiroshi
    Department of Electrical Engineering and Computer Sciences, Graduate School of Engineering, University of Hyogo

Bibliographic Information

Other Title
  • 背後電極付き微小間隙内の沿面放電特性
  • ハイゴ デンキョク ツキ ビショウ カンゲキナイ ノ エンメン ホウデン トクセイ

Search this article

Abstract

We describe about characteristics of creeping discharge developed in a narrow gap with a backside electrode, under μs pulse voltage application. As a result, in the gas with 3% SF6 mixture in N2, the flashover voltage in the pressures of 0.2 and 0.3MPa decreased by approximately 5% compared to that of 0.1MPa in both a filamentous straight backside electrode and a filamentous curve backside electrode. V-characteristics of which flashover voltage decreased were obtained by SF6 mixture in N2. We obtained V-characteristics on the flashover voltage at SF6 content in the range of D=3%-100% for a filamentous backside electrode. Flashover voltages at a filamentous straight backside electrode were higher than that of a filamentous curve backside electrode. From the corona observation using ultra-high speed camera, it was found that the flashover is generated along the backside electrode.

Journal

Citations (3)*help

See more

References(23)*help

See more

Keywords

Details 詳細情報について

Report a problem

Back to top