SF_6ガスブッシングの小形化に向けた絶縁技術開発 : 小形800kVガスブッシングの開発 Development of Insulation Technology in Compact SF_6 Gas-filled Bushings : Development of Compact 800kV SF_6 Gas-filled Bushings
As for gas insulated switchgear (GIS), small space requirement and economical efficiency have been demanded. Circuit breakers (CB), disconnecting switches (DS) and earthing switches (ES) have been designed toward compactness. Compact & light bushings have been also required. As for bushings of GIS, there are roughly three types; capacitor, gas-filled and molding bushings. Since gas-filled bushings have the feature which is both of the lightness and the economical efficiency, it is important to develop compact and light gas-filled bushings by improvement of insulation technology. The main subject for compact design is reduction of electric field strength on the outside hollow insulator around the inside grounded electrode tip. We devised a new inner grounded electrode structure which consists of some column electrodes. This paper describes the effect of reduction of maximum value of electric field strength on the outside hollow insulator by a new inner grounded electrode. Then, improvement of insulation performance for electrodes with insulation coating in SF<sub>6</sub> gas is described as composite insulation technology. Finally, the efficacy of these insulation technologies is described by fundamental insulation test results of prototype compact 800kV SF<sub>6</sub> gas-filled bushing.
- 電気学会論文誌. B, 電力・エネルギー部門誌 = The transactions of the Institute of Electrical Engineers of Japan. B, A publication of Power and Energy Society
電気学会論文誌. B, 電力・エネルギー部門誌 = The transactions of the Institute of Electrical Engineers of Japan. B, A publication of Power and Energy Society 128(3), 586-592, 2008-03-01
The Institute of Electrical Engineers of Japan