シリアル2リンク2慣性系の非干渉化同定と物理パラメータ推定

DOI Web Site Web Site BIBCODE 被引用文献5件 参考文献17件
  • 大明 準治
    慶應義塾大学 理工学部 物理情報工学科 （株）東芝 研究開発センター
  • 足立 修一
    慶應義塾大学 理工学部 物理情報工学科

書誌事項

タイトル別名
  • Decoupling Identification and Physical Parameter Estimation for Serial Two-Link Two-Inertia System
  • シリアル 2 リンク 2 カンセイケイ ノ ヒカンショウカ ドウテイ ト ブツリ パラメータ スイテイ

この論文をさがす

抄録

This paper proposes a multivariable identification method for a SCARA-type planar two-link robot arm with elastic joints caused by reduction gears, which is treated as a serial two-link two-inertia system. The arm for the experimental verification is equipped with accelerometers that have the two roles described below. The proposed method consists of three steps. The first step is the rigid model parameter estimation by the least-squares method. The second step is the elastic model identification using a multi-input multi-output state space model technique, which enables the nonlinear interaction torques between two links to be decoupled. The torques, calculated using the accelerometer signals and the rigid model parameters, are employed as inputs for decoupling in the multi-input identification. The angular velocities of the links, calculated using the accelerometer signals and the motor encoder signals, are employed as outputs for improving accuracy in the multi-output identification. The decoupling method divides the serial two-link two-inertia system into two one-link two-inertia systems in this step. The third step is the physical parameter estimation of the one-link two-inertia systems. The physical parameters consist of motor inertias, link inertias, joint-friction coefficients and joint-spring coefficients. Furthermore fine tuning of the estimated physical parameters is carried out using closed-loop simulations with the nonlinear least-squares optimization. Experimental results using the two-link arm have shown the accuracy of the proposed identification method.

収録刊行物

被引用文献 (5)*注記

もっと見る

参考文献 (17)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ