高周波誘導加熱を利用したIH-FPP処理システムの構築とそれによるS45C鋼の表面改質 Development of IH-FPP Processing System by Induction Heating and Surface Modification of S45C Steel

この論文にアクセスする

この論文をさがす

著者

抄録

  A new surface treatment system (IH-FPPsystem) combined with an induction heating and a fine particle peening machine were developed. FPP treatments were carried out on structural steel discs by using Cr shot particle at room temperature, 400°C, 600°C and 900°C. After characterizing the surfaces by SEM, EDX and XRD, corrosion tests were performed by a three electrode method using a computer driven potentiostat. No noticeable differences were observed on the specimen treated at RT, 400°C and 600°C. In the case of the specimen treated at 900°C, however, higher corrosion resistance which is almost the same as FPP treated stainless steel (SUS316L) was observed. This was because Cr diffused layer covered with relatively smooth oxidized surface prevented a corrosion reaction in 3%NaCl environment.<br>

収録刊行物

  • 日本金屬學會誌 = Journal of the Japan Institute of Metals  

    日本金屬學會誌 = Journal of the Japan Institute of Metals 72(5), 347-352, 2008-05-01 

    The Japan Institute of Metals

参考文献:  13件

参考文献を見るにはログインが必要です。ユーザIDをお持ちでない方は新規登録してください。

被引用文献:  1件

被引用文献を見るにはログインが必要です。ユーザIDをお持ちでない方は新規登録してください。

各種コード

  • NII論文ID(NAID)
    10021150303
  • NII書誌ID(NCID)
    AN00062446
  • 本文言語コード
    JPN
  • 資料種別
    ART
  • ISSN
    00214876
  • NDL 記事登録ID
    9514316
  • NDL 雑誌分類
    ZP41(科学技術--金属工学・鉱山工学)
  • NDL 請求記号
    Z17-314
  • データ提供元
    CJP書誌  CJP引用  NDL  J-STAGE 
ページトップへ